Skip to content

Safety instructions

The motor may only installed by qualified personnel who:

  • have read and understood the mounting instructions of both blind and motor, failing to do so can lead to serious injury.
  • are familiar with the electronic safety aspects
  • recognize and avoid danger which can be produced from the mechanical or electrical components
  • always observe and are familiar with the local safety, labour regulations and laws
  • will uphold all the above, when performing maintenance on a motor or blind
  • the motor may only be used in combination with the appropriate and suitable power source, supplied by your sales office
  • A remote control is considered NOT to be a children's toy
  • HDE DC motors are rated for 10000 cycles, replacement is necessary when cycle limit is reached
warning drop
Never drop the motor!
warning drop
Never drill into the motor!
warning drop
Do not immerse into liquid!
warning drop
Avoid collisions!
warning drop
Do not cut any cables!

PowerView® M25T IRB motor

new motor

Features & benefits

PowerView® Motorisation
The second generation of the widely appraised PowerView® tubular motor comes with an integrated antenna and Li-ion Rechargeable battery Pack (IRB). It can be charged using a 5V USB charger with USB type C connector.
Quiet Operation
This second generation PowerView® M25T motor makes less noise than alternative motors in the market. Regardless of the running speed this motor is ultra quiet.
Smooth operation
The motor has a slow start function for a better quality feel of movement. Increased comfort is achieved by running the motor in slow speed mode using the PowerView® remote or activated as a scene within the PowerView® App.
Designed with safety in mind
Along with the added convenience of cordless operation, PowerView® Motorisation creates a safer environment for homes with young children and pets.

Technical data

Rated voltage

3.65 Vdc


8 Ah

Type of Battery


Type of connection

USB type-C

Charger type

recommended (5 V, >2 A)

Nominal torque

0.8 Nm @ 30rpm

Nominal speed

30 rpm

Scene/automation speed

15 rpm

Protection rate

IP 30

insulation class


limit switch type


Operation temp.

0…+60 °C

Charging temp.

0…+45 °C


0.54 kg



Radio frequency

2407 MHz

Duty cycle

2 min On / 15 min off





Product code

Packing Unit




72 pcs

USB-C charger

Logistics / Applications

Article number


Min. order qty

10 pcs


Roller Blinds Ø31/37mm

Size limitations (mm)

Ø31mm / Width 530-2000; Height 200-3000

Ø37mm / Width 530-2500; Height 200-3000

Weight limitations (kg)

Ø31mm / max. 4.6

Ø37mm / max. 4.0

Important notice

Hunter Douglas Europe B.V. and its affiliates (Hunter Douglas) reserve the right to make corrections, enhancements, improvements and other changes to its products and services, and to discontinue any product or service. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products (also referred to herein as "components") are sold subject to Hunter Douglas’ terms and conditions of sale supplied at the time of order acknowledgment. Hunter Douglas warrants performance of its components to the specifications applicable at the time of sale, in accordance with its standard warranty terms. Testing and other quality control techniques are used to the extent Hunter Douglas deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. Hunter Douglas assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products, applications and interfaces using Hunter Douglas components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. Hunter Douglas does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which Hunter Douglas components or services are used. Information published by Hunter Douglas regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from Hunter Douglas under the patents or other intellectual property of Hunter Douglas. Reproduction of Hunter Douglas information in Hunter Douglas data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Hunter Douglas is not responsible or liable for any altered documentation. Information of third parties may be subject to additional restrictions. Resale of Hunter Douglas components or services with statements different from or beyond the parameters stated by Hunter Douglas for that component or service voids all express and any implied warranties for the associated Hunter Douglas component or service and is an unfair and deceptive business practice. Hunter Douglas is not responsible or liable for any such statements. Buyers acknowledge and agree that they are solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of Hunter Douglas components in its applications, notwithstanding any applications-related information or support that may be provided by Hunter Douglas. Buyers represent and agree that they have all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyers fully indemnify Hunter Douglas and its representatives against any damages arising out of the use of any Hunter Douglas components in safety-critical applications. Manufacturer/Supplier address: Hunter Douglas Europe B.V, P.O. Box 5072 Piekstraat 2 3008 AB Rotterdam The Netherlands

document version: 1.0 | generated: 2021-10-14 23:12:52