Skip to content

PowerView® M25S-PA 18VDC motor

Features & benefits

PowerView® Motorisation
The reddot award winning control system enables your window coverings to be wirelessly operated. The motor neatly fits into the headrail with colour-coordinated white, light grey or anthracite grey end cap.
Intelligent motor
No more TimeStop control module in combination with an RF receiver is required. The PowerView® motor will correct the end limit positions on each cycle as tensioned blinds elongates over time due to slip or local environment conditions.
Three-speed-mode
Using the PowerView® remote, next to the normal and slow operation mode, a fast speed toggle with the up/down buttons can be used.
Designed with safety in mind
Along with the added convenience of cordless operation, PowerView® Motorisation creates a safer environment for homes with young children and pets.
Battery Power makes it easy
A PowerView® blind is battery powered, making it incredibly easy to install, operate and maintain. The battery pack is hidden behind the product or mounted on any flat surface. A power supply is optionally available.

Technical data

Rated voltage (VDC)

18

Type of connection

JST plug

Nominal torque (Nm)

0.8

Nominal speed (rpm)

30

Slow speed (rpm)

15

High speed (rpm)

40

Scene speed (rpm)

15

Max. current consumption (A)

1.2

Protection rate

IP 40

Duty rating

6 min. on / 45 min. off

Operation temp. (°C)

0…+60

Power cable length (m)

0.06

Data cable length (m)

0.06

Weight (kg)

0.16

Approvals

CE

Radio frequency (GHz)

2.4

Dimensions

Logistics / Applications

Article number

17.0126.0000

Min. order qty

20 pcs

Application

20-25-32mm Plissé/Duette® blinds

Size limitations (mm)

See product assembly manual

Accessories

Description

Product code

Packing Unit

Figure

Motor adapter

29.7645.0952

100 pcs

Motor bearing XL

29.7550.0000

200 pcs

Grubscrew M3x8

29.7546.0000

250 pcs

Square nut M3

29.7857.0000

250 pcs

PCBA push button

17.0123.0000

50 pcs

Push button

17.0125.0155

17.0125.0952

17.0125.7199

50 pcs

PCBA connector board

17.0128.0000

50 pcs

Power cable 400mm

Power cable 800mm

Power cable 1350mm

17.0133.0000

17.0134.0000

17.0135.0000

25 pcs

Data cable 350mm

Data cable 750mm

Data cable 1300mm

17.0136.0000

17.0137.0000

17.0138.0000

25 pcs

Battery tube 18V

17.0349.0000

10 pcs

AA battery set (12 pcs)

17.2426.0000

24 pcs

Power supply 18V, 1A

17.2424.0204

1 pc

Power supply HT-18, 1A

17.0343.0000

5 pcs

Safety instructions

The motor may only installed by qualified personnel who:

  • have read and understood the mounting instructions of both blind and motor
  • are familiar with the electronic safety aspects
  • recognize and avoid danger which can be produced from the mechanical or electrical components
  • always observe and are familiar with the local safety, labour regulations and laws
warning drop
Never drop the motor!
warning drop
Never drill into the motor!
warning drop
Do not immerse into liquid!
warning drop
Avoid collisions!
warning drop
Do not cut any cables!

Important notice

Hunter Douglas Europe B.V. and its affiliates (Hunter Douglas) reserve the right to make corrections, enhancements, improvements and other changes to its products and services, and to discontinue any product or service. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products (also referred to herein as "components") are sold subject to Hunter Douglas’ terms and conditions of sale supplied at the time of order acknowledgment. Hunter Douglas warrants performance of its components to the specifications applicable at the time of sale, in accordance with its standard warranty terms. Testing and other quality control techniques are used to the extent Hunter Douglas deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. Hunter Douglas assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products, applications and interfaces using Hunter Douglas components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. Hunter Douglas does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which Hunter Douglas components or services are used. Information published by Hunter Douglas regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from Hunter Douglas under the patents or other intellectual property of Hunter Douglas. Reproduction of Hunter Douglas information in Hunter Douglas data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Hunter Douglas is not responsible or liable for any altered documentation. Information of third parties may be subject to additional restrictions. Resale of Hunter Douglas components or services with statements different from or beyond the parameters stated by Hunter Douglas for that component or service voids all express and any implied warranties for the associated Hunter Douglas component or service and is an unfair and deceptive business practice. Hunter Douglas is not responsible or liable for any such statements. Buyers acknowledge and agree that they are solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of Hunter Douglas components in its applications, notwithstanding any applications-related information or support that may be provided by Hunter Douglas. Buyers represent and agree that they have all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyers fully indemnify Hunter Douglas and its representatives against any damages arising out of the use of any Hunter Douglas components in safety-critical applications.


document version: 1.5 | generated: 2019-07-17 23:56:40