Skip to content

M25T 24V motor

m25t 3d

Features & benefits

Quiet Operation
The M25T motor offers lower noise levels than alternative DC motors in the market. This increases the quality feel and comfort for the user.
Consumer friendly limit setting
The motor has electronic end limits. Setting the upper and lower limit can easily be done in a blink of an eye thanks to the use of a programming key.
Smart electronics
The motor is equiped with current and speed detection. Different blinds can operate at the same speed.The motor direction is automatically assigned after the first end limits programming.
Smooth operation
The motor has a slow start, slow stop function.
Reduced assembly time
The motor fits the 31mm and 37mm tube in the EOS®500 Roller Blind hardware without adapters and saves assembly time.
Superior design
The M25T motors have an small light gap of 9mm on the idler side and 14mm on the operation side.

Technical data

24v connection

Rated voltage (VDC)

24

Number of wires

2

Nominal torque (Nm)

0.8

Nominal speed (rpm)

35

Current consumption (A)

0.35

Protection rate

IP 40

Duty rating

8 min. on / 8 min. off

Operation temp. (°C)

0…+60

Power cable length (m)

2.4

Power cable colour

White (+); white/grey (-)

Connecting cable Ø (mm)

1.43 (AWG 24)

Weight (kg)

0.33

Approvals

CE

Dimensions

m25t dimensions

Accessoires

Description

Product code

Packing Unit

Figure

Limit key

17.0108.3251

100 pcs

limit key

Intermediate key

17.0115.2300

10 pcs

intermediate key

Logistics / Applications

Article number

17.0104.0000

Min. order qty

20 pcs

Application

EOS®500 Xcel Roller blinds

Twist®/Double Roller blinds

Facette® shades

Safety instructions

The motor may only installed by qualified personnel who:

  • have read and understood the mounting instructions of both blind and motor
  • are familiar with the electronic safety aspects
  • recognize and avoid danger which can be produced from the mechanical or electrical components
  • always observe and are familiar with the local safety, labour regulations and laws
warning drop
Never drop the motor!
warning drop
Never drill into the motor!
warning drop
Do not immerse into liquid!
warning drop
Avoid collisions!
warning drop
Do not cut any cables!

Important notice

Hunter Douglas Europe B.V. and its affiliates (Hunter Douglas) reserve the right to make corrections, enhancements, improvements and other changes to its products and services, and to discontinue any product or service. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products (also referred to herein as "components") are sold subject to Hunter Douglas’ terms and conditions of sale supplied at the time of order acknowledgment. Hunter Douglas warrants performance of its components to the specifications applicable at the time of sale, in accordance with its standard warranty terms. Testing and other quality control techniques are used to the extent Hunter Douglas deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. Hunter Douglas assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products, applications and interfaces using Hunter Douglas components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. Hunter Douglas does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which Hunter Douglas components or services are used. Information published by Hunter Douglas regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from Hunter Douglas under the patents or other intellectual property of Hunter Douglas. Reproduction of Hunter Douglas information in Hunter Douglas data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Hunter Douglas is not responsible or liable for any altered documentation. Information of third parties may be subject to additional restrictions. Resale of Hunter Douglas components or services with statements different from or beyond the parameters stated by Hunter Douglas for that component or service voids all express and any implied warranties for the associated Hunter Douglas component or service and is an unfair and deceptive business practice. Hunter Douglas is not responsible or liable for any such statements. Buyers acknowledge and agree that they are solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of Hunter Douglas components in its applications, notwithstanding any applications-related information or support that may be provided by Hunter Douglas. Buyers represent and agree that they have all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyers fully indemnify Hunter Douglas and its representatives against any damages arising out of the use of any Hunter Douglas components in safety-critical applications.


document version: 1.6 | generated: 2019-03-21 02:48:03